Distance-settable Photoelectric Sensor TOF Laser Sensor
E3AS-F Series
Optimal sensing distance (50 to 1,500 mm)
for use on conveyor lines
• Wide sensing distance of 50 to 1,500 mm*, enabling use on any
conveyor line width
• Time of flight (TOF) type sensors for use with any type of
conveyed object
• Compact body can be mounted anywhere
• (Metal body (SUS316L), Plastic body type (PBT/PC))
• Teaching method allows anyone to set optimal threshold values
• Manufactured using Omron's proprietary laser sealing method
(IP67/IP69K/IP67G)
• Antifouling coatings reduce the cleaning frequency on the lens.
• IO-Link reduces time required for startups and changeovers
* The sensing distance of the E3AS-F1500 series.
For the most recent information on models that have been
certified for safety standards, refer to your Omron website.
Refer to Safety Precautions on page 9.
Ordering Information
Sensors [Refer to Dimensions on page 11.]
SUS 316L Body
Connection
method
Infrared light
Sensing distance
(white paper)
Output
IO-Link baud rate
Pre-wired (2 m) 1
50 mm
PNP output
COM3 (230.4 kbps)
E3AS-F1500IMN 2M
E3AS-F1500IMD 2M
E3AS-F1500IMT 2M
E3AS-F1500IMN M3
E3AS-F1500IMD M3
E3AS-F1500IMT M3
E3AS-F1500IMN-M3J 0.3M
E3AS-F1500IMD-M3J 0.3M
E3AS-F1500IMT-M3J 0.3M
E3AS-F1500IMN-M1TJ 0.3M
E3AS-F1500IMD-M1TJ 0.3M
E3AS-F1500IMT-M1TJ 0.3M
E3AS-F1000IMN 2M
E3AS-F1000IMD 2M
E3AS-F1000IMT 2M
E3AS-F1000IMN M3
E3AS-F1000IMD M3
E3AS-F1000IMT M3
E3AS-F1000IMN-M3J 0.3M
E3AS-F1000IMD-M3J 0.3M
E3AS-F1000IMT-M3J 0.3M
E3AS-F1000IMN-M1TJ 0.3M
E3AS-F1000IMD-M1TJ 0.3M
E3AS-F1000IMT-M1TJ 0.3M
1,500 mm
M8 Connector
M8 Pre-wired
Connector
M12 Pre-wired
Connector 2
Pre-wired (2 m) 1
50 mm
NPN output
---
Model
PNP output
COM2 (38.4 kbps)
1,000 mm
M8 Connector
M8 Pre-wired
Connector
M12 Pre-wired
Connector 2
PBT Body
Connection
method
Pre-wired (2 m) 1
Sensing distance
(white paper)
50 mm
Output
IO-Link baud rate
1,500 mm
M8 Connector
M8 Pre-wired
Connector
M12 Pre-wired
Connector 2
Pre-wired (2 m) 1
50 mm
M8 Connector
NPN output
---
Model
PNP output
COM2 (38.4 kbps)
PNP output
COM3 (230.4 kbps)
E3AS-F1500IPN 2M
E3AS-F1500IPD 2M
E3AS-F1500IPT 2M
E3AS-F1500IPN M3
E3AS-F1500IPD M3
E3AS-F1500IPT M3
E3AS-F1500IPN-M3J 0.3M
E3AS-F1500IPD-M3J 0.3M
E3AS-F1500IPT-M3J 0.3M
E3AS-F1500IPN-M1TJ 0.3M
E3AS-F1500IPD-M1TJ 0.3M
E3AS-F1500IPT-M1TJ 0.3M
E3AS-F1000IPN 2M
E3AS-F1000IPD 2M
E3AS-F1000IPT 2M
E3AS-F1000IPN M3
E3AS-F1000IPD M3
E3AS-F1000IPT M3
1,000 mm
M8 Pre-wired
E3AS-F1000IPN-M3J 0.3M
E3AS-F1000IPD-M3J 0.3M
Connector
M12 Pre-wired
E3AS-F1000IPN-M1TJ 0.3M
E3AS-F1000IPD-M1TJ 0.3M
Connector 2
1. Models with 5-m cable length are also available with “5M” suffix. (Example: E3AS-F1500IMN 5M/E3AS-F1500IPN 5M)
2. The Pre-wired Connector (M12) is Smartclick Connector.
E3AS-F1000IPT-M3J 0.3M
E3AS-F1000IPT-M1TJ 0.3M
1
E3AS-F Series
Accessories (Sold Separately)
Sensor I/O Connectors (Sockets on One Cable End)
(Models for Connectors / Pre-wired Connectors)
A Sensor I/O Connector is not provided with the Sensor. Order separately.
Round Water-resistant Connectors XS3F-M8 series
Appearance
Cable specification
Cable diameter
(mm)
Cable connection
direction
M8 Connector
Straight type
Cable length (m)
Sensor I/O Connector
model number
2
XS3F-M8PVC4S2M
5
XS3F-M8PVC4S5M
2
XS3F-M8PVC4A2M
5
XS3F-M8PVC4A5M
Straight
PVC cable
5 dia.
Right-angle type
Right-angle
Note: 1. The XS3W (Socket and Plug on Cable Ends) is also available. Refer to XS3W-M8/XS3F-M8 Series Datasheet (Cat. No. G140).
2. The connectors will not rotate after they are connected.
3. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
Round Water-resistant Connectors XS5 series
Appearance
Cable specification
Cable diameter
(mm)
Cable connection
direction
M12 Smartclick Connector
Straight type
Cable length (m)
Sensor I/O Connector
model number
2
XS5F-D421-D80-F
5
XS5F-D421-G80-F
2
XS5F-D422-D80-F
5
XS5F-D422-G80-F
Straight
PVC robot cable
6 dia.
Right-angle type
Right-angle
Note: 1. The XS5W (Socket and Plug on Cable Ends) is also available. Refer to XS5 on your Omron website for details.
2. The connectors will not rotate after they are connected.
3. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.
2
E3AS-F Series
Mounting Brackets [Refer to Dimensions on page 12.]
A Mounting Bracket is not enclosed with the Sensor. Order as needed.
Appearance
Model
(material)
Applicable Sensor E3AS series
Pre-wired
M8
Pre-wired Connector
M12 Pre-wired
Smartclick Connector
M8 Connector
E39-L201
(SUS304)
Yes
Yes
Yes
---
E39-L202
(SUS304)
Yes
Yes
Yes
---
E39-L203
(SUS304)
Yes
Yes
Yes
Yes 2
E39-L204
(SUS304)
Yes
Yes
Yes
---
E39-L211
(SUS304)
--- 1
--- 1
--- 1
Yes 3
E39-L212
(SUS304)
--- 1
--- 1
--- 1
Yes 3
E39-L214
(SUS304)
--- 1
--- 1
--- 1
Yes 3
L-shaped
Mounting
Bracket
Horizontal
Protective
Cover
Bracket
Rear
Mounting
Bracket
Robust
Mounting
Bracket
L-shaped
Mounting
Bracket
Horizontal
Protective
Cover
Bracket
Robust
Mounting
Bracket
1. Can be used for Pre-wired models, M8 Pre-wired Connector models, and M12 Pre-wired Smartclick Connector models. However, confirm the
bracket shape in advance.
2. Confirm the installation environment and bracket shape of the Sensor I/O Connector to be connected.
3. Use an L-shaped Sensor I/O Connector. Straight types cannot be installed.
3
E3AS-F Series
Ratings and Specifications
Sensing method
TOF (Time of flight)
Type
Model
□N
E3AS-F1500I□D
E3AS-F1500I□T
NPN output
□: M), Plastic case (□: P)
E3AS-F1500I
PNP output/ COM2
Item
Metal case (
PNP output/ COM3
□N
□D
E3AS-F1000I□T
E3AS-F1000I
E3AS-F1000I
Sensing distance
50 mm to the set distance (White paper or black paper
200 × 200 mm)
50 mm to the set distance (White paper or black paper
200 × 200 mm)
Setting range
100 to 1,500 mm (White paper 200 × 200 mm)
100 to 1,000 mm (Black paper 200 × 200 mm)
100 to 1,000 mm (White paper 200 × 200 mm)
100 to 500 mm (Black paper 200 × 200 mm)
Spot diameter (reference value)
95 mm dia. (at distance of 1,000 mm)
Differential travel
15% max. of set distance (Set distance 200 mm min.)
Reflectivity characteristic
(black/white error)
10% max. of set distance (Set distance 200 mm min.)
Light source (wavelength)
Infrared laser (940 nm) Class1 (IEC/EN60825-1:2014)
Power supply voltage
10 to 30 VDC (including 10% ripple (p-p)), Class2
Current consumption
Control output
Input/output
30 mA max.
Load power supply voltage: 30 VDC max., Class2, Load current: 100 mA max.
(Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max.)
Open-collector output (NPN/PNP output depending on model)
NPN
OUTPUT 1: NO (Normally open), OUTPUT 2: NC (Normally closed)
PNP/COM2
PNP/COM3
OUTPUT 1: NO (Normally open)/COM
□, OUTPUT 2: NC (Normally closed)
Protection circuits
Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection
Response time
Operate or reset: 150 ms max.
Distance setting
Teaching method/IO-Link communications
Ambient illumination
(Receiver side)
Incandescent lamp: 3,000 lx max., Sunlight: 10,000 lx max.
Ambient temperature range
Operating: -20 to 55°C, Storage: -40 to 70°C (with no icing or condensation)
Ambient humidity range
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation)
Insulation resistance
20 M min. at 500 VDC
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min
Vibration resistance
10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance
500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection
IP67 (IEC60529) and IP67G1 (JIS C 0920 Annex 1), IP69K (ISO20653)
Indicators
Operation indicator (orange), stability/communication indicator (green 2 )
Connection method
Pre-wired (standard cable length: 2 m), M8 Connector, M8 Pre-wired Connector (standard cable length: 0.3m),
M12 Pre-wired Smartclick Connector (standard cable length: 0.3m)
Weight
(packed state/
Sensor only)
Materials
Pre-wired (2 m)
Metal case type: Approx. 135 g/approx. 90 g
Plastic case type: Approx. 115 g/approx. 70 g
M8 Connector
Metal case type: Approx. 75 g/approx. 30 g
Plastic case type: Approx. 60 g/approx. 15 g
M8 Pre-wired Connector
(0.3m)
Metal case type: Approx. 85 g/approx. 40 g
Plastic case type: Approx. 70 g/approx. 25 g
M12 Pre-wired
Smartclick Connector
(0.3m)
Metal case type: Approx. 95 g/approx. 50 g
Plastic case type: Approx. 75 g/approx. 30 g
Case
Metal case type: Main unit/mounting part/connector part Stainless steel (SUS316L)
Plastic case type: Main unit Polybutylene terephthalate (PBT) /polycarbonate (PC),
Mounting part/connector part Nickel-plated brass
Lens
Methacrylate resin (PMMA)
Display
Metal case type: Polyamide 11 (PA11)
Plastic case type: Polyethersulfone (PES)
Main IO-Link functions
IO-Link
specification
IO-Link
Communication Baud rate
specifications
Data length
Minimum cycle time
Accessories
Operate or reset: 90 ms max.
Operation mode switching between NO and NC, execution of teaching (2-point teaching, Background teaching),
setup of the threshold, timer function of the control output and timer time selecting, monitor output (Detection level,
Incident light level), Restore Factory Settings, Key Lock (Unlock, Lock, Lock (No Button))
Ver. 1.1
COM2 (38.4 kbps), COM3 (230.4 kbps)
PD size: 4 bytes, OD size: 1 byte (M-sequence type: TYPE_2_V)
COM2: 3.5 ms, COM3: 1.2 ms
Instruction manual, compliance sheet, index list (attached for IO-Link type only) and FDA certification label
Note: Mounting Brackets must be ordered separately.
1. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards). The IP67 indicates the same level
of protection as defined by the IEC, and the G indicates that a device has resistance to oil.
2. IO-Link mode: blinking
4
E3AS-F Series
Engineering Data (Reference Value)
Operating Range
Y directions
30
Operating range Y (mm)
Operating range Z (mm)
E3AS-F1500□
Z directions
Z
20
X
10
Set distance: 1,500 mm
Sensing object: White paper,
200 x 200 mm
0
40
Y
30
X
20
10
Set distance: 1,500 mm
Sensing object: White paper,
200 x 200 mm
0
-10
-10
-20
-20
-30
-30
0
200
400
600
800
-40
1,000 1,200 1,400 1,600
0
200
400
600
800
Y directions
Operating range Y (mm)
Operating range Z (mm)
E3AS-F1000□
Z directions
15
Z
10
X
5
Set distance: 1,000 mm
Sensing object: White paper,
200 x 200 mm
0
1,000 1,200 1,400 1,600
Distance X (mm)
Distance X (mm)
15
Y
10
5
Set distance: 1,000 mm
Sensing object: White paper,
200 x 200 mm
0
-5
-5
-10
-10
-15
X
-15
0
200
400
600
800
1,000
1,200
Distance X (mm)
0
200
400
600
800
1,000
1,200
Distance X (mm)
Spot Diameter vs. Sensing Distance
Spot diameter (mm)
E3AS-F1500□
E3AS-F1000□
160
140
120
100
80
60
40
20
0
0
200
400
600
800
1,000 1,200 1,400 1,600
Distance X (mm)
5
E3AS-F Series
Close-range Characteristics
E3AS-F1000□
1,400
Set distance
1,500 mm
1306 mm
1,200
Set distance
1,000 mm
1,000
875 mm
800
Sensing distance (mm)
Sensing distance (mm)
E3AS-F1500□
1,000
Set distance
1,000 mm
900
868 mm
800
700
600
Set distance
500 mm
500
600
431 mm
400
300
400
Set distance
200
Set distance
100 mm
100 mm
200
100
65 mm
10 mm
10 mm
0 mm
0 mm
0
White paper Black paper White paper Black paper
66 mm
0
65mm
66 mm
0 mm
10 mm
10 mm
0 mm
White paper Black paper White paper Black paper
Material
Material
Differential distance for each sensing object Vs. Distance
E3AS-F1000□
Differential distance (%)
Differential distance (%)
E3AS-F1500□
16
14
3
12
10
2
1
8
16
3
14
12
10
2
8
1
6
6
Reflectance of sensing object/
Reflectance of background
1. 10% (Black paper)/90% (White paper)
2. 18% (Gray paper)/90% (White paper)
3. 90% (White paper)/90% (White paper)
4
2
0
0
500
Reflectance of sensing object/
Reflectance of background
1. 10% (Black paper)/90% (White paper)
2. 18% (Gray paper)/90% (White paper)
3. 90% (White paper)/90% (White paper)
4
2
1,000
0
1,500
0
200
400
600
Set distance (mm)
800
1,000
Set distance (mm)
Sensing Object Angle Characteristics
Horizontal
Change in sensing distance (%)
Change in sensing distance (%)
E3AS-F1500□
Vertical
10
White paper
0
Black paper
-10
Set distance:
White paper 1,500 mm/
Black paper 1,000 mm
Sensing object: White paper/
Black paper 200×200 mm
-20
Vertical
Inclination
Angle
-30
+θ
-40
White paper
0
Set distance:
White paper 1,500 mm/
Black paper 1,000 mm
Sensing object: White paper/
Black paper 200×200 mm
Black paper
-5
Horizontal
Inclination
Angle
-10
+θ
-15
-θ
-θ
Sensing object
Center line
Center line
Sensing object
-50
-40
-30
-20
-10
0
10
20
30
40
Angle θ (°)
6
5
-20
-40
-30
-20
-10
0
10
20
30
40
Angle θ (°)
E3AS-F Series
10
Horizontal
White paper
0
Black paper
-10
Set distance:
White paper 1,000 mm/
Black paper 500 mm
Sensing object: White paper/
Black paper 200×200 mm
-20
Vertical
Inclination
Angle
-30
Change in sensing distance (%)
Change in sensing distance (%)
E3AS-F1000□
Vertical
10
0
White paper
Black paper
-10
Set distance:
White paper 1,000 mm/
Black paper 500 mm
Sensing object: White paper/
Black paper 200×200 mm
-20
Horizontal
Inclination
Angle
-30
+θ
+θ
-40
-40
-θ
-θ
-50
-40
Sensing object
Center line
Sensing object
Center line
-30
-20
-10
0
10
20
30
-50
-40
40
-30
-20
-10
0
10
20
Angle θ (°)
30
40
Angle θ (°)
Sensing Distance vs. Sensing Object Material
Sensing distance (mm)
Sensing distance (mm)
E3AS-F1500□
E3AS-F1000□
(Set Distance of 1,500 mm using White (Set Distance of 1,000 mm using White
Paper)
Paper)
1,600
1,400
1,200
1,000
1,000
900
800
700
600
500
800
400
600
300
400
200
200
100
0
Mirror
SUS
Black rubber
Black paper
Material
Cardboard
Veneer
White paper
Mirror
SUS
Black rubber
Black paper
Cardboard
White paper
Veneer
0
Material
Sensing Object Size vs. Sensing Distance
E3AS-F1000□
1,800
Distance (mm)
Distance (mm)
E3AS-F1500□
White paper
1,600
1,400
Black paper
1,200
1,800
1,600
1,400
1,200
White paper
1,000
1,000
800
800
600
600
400
0
400
d
200
10
20
30
40
50
60
70
d
200
d
0
Black paper
80
90 100
Side length (one side) of sensing object: d (mm)
0
0
d
10
20
30
40
50
60
70
80
90 100
Side length (one side) of sensing object: d (mm)
7
E3AS-F Series
I/O Circuit Diagrams/ Timing Charts
NPN Output
Model
Timing chart
Output circuit
+V
Distance
threshold
Unstable NEAR
E3AS-F1500I□N□
E3AS-F1000I□N□
Stability&Communication
indicator (green)
Operation indicator (orange)
Control output 1
Control output 2 *
ON
OFF
ON
OFF
ON
OFF
ON
OFF
OUT1
Unstable FAR
Stable NEAR
OUT2
0V
Stable FAR
Brown
Load 100mA
Black Load 100mA
max.
max.
White
Blue
10 to 30 VDC
Connector Pin Arrangement
M12 Pre-wired
Smartclick Connector
M8 Connector,
M8 Pre-wired Connector
* The initial value of control output 2 is reverse of control output 1.
PNP Output
Output circuit
Model
Standard I/O mode (SIO mode) 1
+V
OUT1
OUT2
E3AS-F1500I□D□
E3AS-F1500I□T□
E3AS-F1000I□D□
E3AS-F1000I□T□
0V
IO-Link Communication mode (COM mode) 2
Brown
Brown
+V
10 to 30 VDC
Black
White
Blue Load
100mA
max.
Load
100mA
max.
C/Q
White
DO
0V
IO-Link Master Unit
DI/DO
Blue
Connector Pin Arrangement
M12 Pre-wired
Smartclick Connector
+V
Black
C/Q
0V
Connector Pin Arrangement
M8 Connector,
M8 Pre-wired Connector
M12 Pre-wired
Smartclick Connector
M8 Connector,
M8 Pre-wired Connector
1. Standard I/O mode is used as PNP ON/OFF output.
2. IO-Link Communication mode is used for communications with the IO-Link Master. C/Q performs IO-Link communications. Sensor output DO
performs ON/OFF output.
Timing charts
Distance
threshold
Output mode
Unstable NEAR
Stable NEAR
Stability&Communication
indicator (green)
Standard I/O
mode
(SIO mode)
Operation indicator (orange)
Control output 1
Control output 2
IO-Link
Communication
mode
(COM mode)
Unstable FAR
Stable FAR
ON
OFF
ON
OFF
ON
OFF
ON
OFF
1 The initial value of control output 2 is reverse of control
output 1.
2. The timer function of the control output can be set up by
the IO-Link communications. (It is able to select ON
delay, OFF delay, or one-shot function and select a
timer time of 1 to 9,999 ms (T).)
ON delay
Sensing
object
Present
Not
present
ON
OFF
ON
NC
OFF
NO
1
0
1
0
OFF delay
Sensing
object
T
NO
T
NC
Present
Not
present
ON 1
OFF 0
ON 1
One Shot
Sensing
object
T
NO
T
OFF 0
NC
Present
Not
present
ON 1
OFF 0
ON 1
Please contact your Omron sales representative regarding
the IO-Link setup file (IODD file).
Stability&
Flashing
Communication
(1 second cycle)
indicator (green)
ON
Operation indicator (orange)
OFF
1
Communication output
0
ON
Control output 2
OFF
Nomenclature
Operation indicator (orange)
Stability&Communication
indicator (green)
8
T
OFF 0
Note: Shown above are the factory settings. Refer to the index list for the default settings at time of shipment from factory.
PNP/COM output logic can be reversed by IO-Link communication.
The operation indicator (orange) lights up when control output 1 is ON or communication output is 1.
E3AS-F1500□
E3AS-F1000□
T
Teach button
Note: The indicators work differently depending on sensor status.
E3AS-F Series
Safety Precautions
Be sure to read the precautions for all models in the website at: http://www.ia.omron.com/.
Warning Indications
Warning level
WARNING
CAUTION
Indicates a potentially hazardous situation
which, if not avoided, will result in minor or
moderate injury, or may result in serious
injury or death. Additionally there may be
significant property damage.
Caution level
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury or in property damage.
Precautions
for Safe Use
Supplementary comments on what to do or
avoid doing, to use the product safely.
Precautions
for Correct Use
Supplementary comments on what to do or
avoid doing, to prevent failure to operate,
malfunction or undesirable effect on product
performance.
Meaning of Product Safety Symbols
General prohibition
Indicates the instructions of unspecified
prohibited action
Caution, explosion
Indicates the possibility of explosion under
specific conditions
Laser Caution
Indicates information related to laser safety
WARNING
This product is not designed or rated for ensuring
safety of persons either directly or indirectly.
Do not use it for such purpose.
To safely use laser products
WARNING
Do not expose your eyes to the laser beam either
directly or indirectly (i.e., after reflection from a
mirror or shiny surface). The laser beam has a high
power density and exposure may result in loss of
sight.
Laser safety measures for laser equipment are stipulated in
Japan and other countries. For usage in Japan and for export to
other countries combined with other products, follow the
instructions described below categorized in three cases
respectively.
1. Usage in Japan
The JIS C6802:2014 standard stipulates the safety
precautions that users must take according to the class of the
laser product. This product is classified into Class 1 defined
by this standard.
2. Usage in U.S.
When this product is installed in a device and exported to the
U.S., it is subjected to the U.S. FDA (Food and Drug
Administration) laser regulations. This product is classified
into Class 1 by the IEC 60825-1:2007 standard according to the
provisions of Laser Notice No. 50 of the FDA standard. This
product is already reported to CDRH (Center for Devices and
Radiological Health).
Accession Number: 1920014-000
Because the product is small, we can not attach an FDA
certification label on the main body, so we enclose it in the
packing box. When exporting a device equipped with the
product to the U.S., attach an FDA certification label near the
sensor mounting of customer equipment.
FDA certification label
CAUTION
Never use the product with an AC power supply.
Otherwise, explosion may result.
3. Usage in China
This product is classified into Class 1 by the IEC60825-1:2007
standard.
4. Usage in a country other than U.S. and China.
This product is classified into Class 1 by the IEC60825-1:2014
standard.
9
E3AS-F Series
Precautions for Safe Use
Precautions for Correct Use
The following precautions must be observed to ensure safe operation.
(1) Do not reverse the power supply connection or connect to an AC
current.
(2) Do not short the load.
(3) Be sure that before making supply the supply voltage is less than
the maximum rated supply voltage (30 VDC).
(4) Do not use the product in environments subject to flammable or
explosive gases.
(5) Do not use the product under a chemical or an oil environment
without prior evaluation.
(6) Do not attempt to modify the product.
(1) Do not hit the product using a hammer for installation.
(2) The product must be installed with the specified torque or less.
For M8 connector, the proper tightening torque is from 0.3 to 0.4
Nm. For M12 connector, the proper tightening torque is from
0.39 to 0.49 Nm. In case of M12 smartclick connector, manually
tighten the connector.
(3) Do not use the product in any atmosphere or environment that
exceeds the ratings.
(4) Output pulses may occur when the power supply is turned OFF.
We recommend that you turn OFF the power supply to the load
or load line first.
(5) Use an extension cable less than 100 m long for Standard I/O
mode and less than 20 m for IO-Link Communication mode.
(6) Do not pull on the cable with excessive strength.
(7) Please wait for at least 500 ms after turning on the product's
power until it is available for use.
(8) Though this is type IP67, do not use in the water, rain or outdoors.
(9) If the Sensor wiring is placed in the same conduits or ducts as
high-voltage or high-power lines, inductive noise may cause
malfunction or damage. Wire the cables separately or use a
shielded cable.
(10) Do not use the product in locations subject to direct sunlight.
(11) Do not use the product where humidity is high and dew
condensation may occur.
(12) Do not use the product where corrosive gases may exist.
(13) If high-pressure washing water and so on hits the teach button, it
might lead to malfunctioning. So, consider use of the key lock
function.
(14) Do not apply high-pressure washing water directly to the sensor's
light emitting / receiving surface from a short distance. As the
antifouling feature may be impaired, keep a sufficient distance
from the light emitting / receiving surface.
(15) Do not use the product at a location subject to shock or vibration.
(16) To use a commercially available switching regulator, FG (frame
ground) must be grounded.
(17) Do not use organic solvents (e.g. paint thinner and alcohol) for
cleaning. Otherwise optical properties and protective structure
may deteriorate.
(18) Be sure to check the influence caused by surrounding
environments such as background objects and LED lighting
before using the product.
(19)
Please dispose in accordance with applicable regulations.
10
E3AS-F Series
Dimensions
(Unit: mm)
Tolerance class IT16 applies to dimensions in this data sheet unless otherwise
specified.
Sensors
Pre-wired Models/Pre-wired Connector Models
E3AS-F1500□ (-M1TJ/-M3J)
E3AS-F1000□ (-M1TJ/-M3J)
14
7.6
Operation indicator (orange)
Stability&Communication indicator (green)
Teach button
Metal case type
Plastic case type
23.4
22
Two, M3
11.4
23.4
22
Two, M3
3
1.5
3
4.6
4.6
39.3 25.4
39.3 25.4
7.9
7.9
Receiver lens
15.8
3
37.9
Emitter lens
4.25 dia. vinyl-insulated round cable
with 4conductors (Conductor cross
section:0.2 mm2 (AWG24),
Insulator diameter: 1.1 mm),
Standard length: 2 m
5.7
Minimum bending radius/unbendable
length of cord
4.25 dia. vinyl-insulated round cable
with 4conductors (Conductor cross
section:0.2 mm2 (AWG24),
Insulator diameter: 1.1 mm),
Standard length: 2 m
M12 Pre-wired Smartclick Connector type
E3AS-F1500 -M1TJ/E3AS-F1000 -M1TJ
□
□
4.25 dia. vinyl-insulated
round cable with 4 conductors.
Unbendable length
5 mm
M12×P1
Minimum bending radius
R13 mm
2
1
3
4
M8 Pre-wired connector type
E3AS-F1500 -M3J/E3AS-F1000
□
□-M3J
4.25 dia. vinyl-insulated
round cable with 4 conductors.
2
M8×P1
Connector Models
E3AS-F1500□ M3
E3AS-F1000□ M3
1
4
3
14
7.6
Operation indicator (orange)
Stability&Communication indicator (green)
Teach button
22
Two, M3
11.4
3
1.5
Receiver lens
4.6
15.8
37.9
25.4
3
Emitter lens
7.9
M8×P1
5.4
A
A:
Metal case type (E3AS-F@M@ M3) :9.6m
Plastic case type (E3AS-F@P@ M3) :11.6
11
E3AS-F Series
Accessories (Sold Separately)
Mounting Brackets
E39-L201
Photoelectric Sensor Accessory
are installed
(Example of E3AS-F1500 )
(Four, R1.8)
16
□
4
3
22
3.5
11.4
3.5
6.8
8.5
21.7
9
31
8.3
14.5
*
Emitting center
14.2
25.4
48
11.2
41.4
27.2
R25.4
16
16
T3
5.7
27
Material: Stainless steel (SUS304)
* Accessories
2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W)
E39-L202
Photoelectric Sensor Accessory
are installed
(Example of E3AS-F1500 )
□
11.9
15
5.9
26.7
16.9
13.3
6.7
Four, 3.5 dia
7
*
Emitting center
14.2
46
45°
45°
25.4
10
11.2
76
41.5
45°
45°
30.3
33
33
18
T3
18
14°
(Two, R1.8)
8.5
3.5
3.5
7
15.7
R12
18.7
Material: Stainless steel (SUS304)
* Accessories
2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W)
E39-L203
Photoelectric Sensor Accessory
are installed
(Example of E3AS-F1500 )
□
22
T3
13.5
3.5 dia.
6.7
6
Emitting center
7
31.9
42
38.2
32.8
28.6
14.2
R25.4
11.2
6
3.5
(Two, R1.8)
(Four, R1.8)
Two, 3.5
20°
44
Material: Stainless steel (SUS304)
* Accessories
2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W)
12
19.2
5.7
*
E3AS-F Series
E39-L204
50°
Two, 3.5
(Four, R1.8)
Photoelectric Sensor Accessory
are installed
(Example of E3AS-F1500 )
□
55 dia.
41.5 dia.
14.3
28.5
(28.5)
22.1
12.7
5.7
6
*
1
18.8
6.6
50.2
Two, 3.5
Two, R25.4
14.2
42.2
11.2
Emitting center
26.9
15.7
T3
Two, 5 dia.
Material: Stainless steel (SUS304)
* Accessories
2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W)
E39-L211
(Four, R1.8)
16
4
Photoelectric Sensor Accessory
are installed
(Example of E3AS-F1500 )
□
8.3
22
11.4
3.5
3.5
6.8
3
22.4
8.5
9
31
14.5
5.7
*
Emitting center
14.2
25.4
11.2
69.7
R25.4
48.7
37.5
37.5
T3
27
Material: Stainless steel (SUS304)
* Accessories
2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W)
13
E3AS-F Series
E39-L212
Photoelectric Sensor Accessory
are installed
(Example of E3AS-F1500 )
□
11.9
5.9
15
26.7
13.9
13.3
6.7
7
5.7
Four, 3.5 dia.
*
Emitting center
14.2
25.4
10.9
11.2
71.6
97.6
63.1
52
8.5
T3
(Two, R1.8)
3.5
3.5
7
R12
16.6
19.6
Material: Stainless steel (SUS304)
* Accessories
2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W)
E39-L214
50°
2-3.5
(Four, R1.8)
Photoelectric Sensor Accessory
are installed
(Example of E3AS-F1500 )
□
55 dia.
41.5 dia.
14.2
28.5
22.1
12.7
5.7
6
6.6
Two, R25.4
18.8
Two, 3.5
67.6
9
38.4
30.4
16.7
14
Emitting center
49.6
45°
Two, 5°
Material: Stainless steel (SUS304)
* Accessories
2-M3-L12 Cross Recessed Pan Head Screws (Attached to SW+JIS W)
14.2
11.2
72.6
T3
*
1
(Four, R1.8)
38.6
OMRON AUTOMATION AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • automation.omron.com
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • automation.omron.com
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
Ciudad de México • 52.55.5901.4300 • 01.800.386.6766 • mela@omron.com
OMRON ARGENTINA • SALES OFFICE
Buenos Aires, Argentina • +54.11.4521.8630 • +54.11.4523.8483
mela@omron.com
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
San Pedro Garza García, N.L. • 81.12.53.7392 • 01.800.386.6766 • mela@omron.
com
OTHER OMRON LATIN AMERICA SALES
+54.11.4521.8630 • +54.11.4523.8483 • mela@omron.com
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
Eugenio Garza Sada,León, Gto • 01.800.386.6766 • mela@omron.com
Controllers & I/O
• Machine Automation Controllers (MAC) • Motion Controllers
• Programmable Logic Controllers (PLC) • Temperature Controllers • Remote I/O
Authorized Distributor:
Robotics
• Industrial Robots • Mobile Robots
Operator Interfaces
• Human Machine Interface (HMI)
Motion & Drives
• Machine Automation Controllers (MAC) • Motion Controllers • Servo Systems
• Frequency Inverters
Vision, Measurement & Identification
• Vision Sensors & Systems • Measurement Sensors • Auto Identification
Systems
Sensing
• Photoelectric Sensors • Fiber-Optic Sensors • Proximity Sensors
• Rotary Encoders • Ultrasonic Sensors
Safety
• Safety Light Curtains • Safety Laser Scanners • Programmable Safety Systems
• Safety Mats and Edges • Safety Door Switches • Emergency Stop Devices
• Safety Switches & Operator Controls • Safety Monitoring/Force-guided Relays
Control Components
• Power Supplies • Timers • Counters • Programmable Relays
• Digital Panel Meters • Monitoring Products
Switches & Relays
• Limit Switches • Pushbutton Switches • Electromechanical Relays
• Solid State Relays
Software
• Programming & Configuration • Runtime
E588AI-E3-02
Note: Specifications are subject to change.
© 2019 Omron. All Rights Reserved.
Printed on recycled paper.
Printed in U.S.A.
工商网监
湘ICP备2023018690号
